Full FHA Water Test Sampling Instruction

CNA Services

QuickTips

The average person uses 50 gallons of water a day. If you obtain water from a public water supply, your water bill lets you know that each drop wasted costs you money.

New York State Department of Health
Certified Laboratory
ELAP/NELAC 11534
EPA Lab Code #NY01277

Full FHA Water Test Sampling Instruction

1. Lead, Iron, Manganese & Sodium (1 liter bottle).
Let water sit undisturbed in piping for 6-10 hours (do not exceed 10 hours). At the kitchen tap, fill the 1 liter bottle with stagnant water. Do not run the water first or rinse the container, etc. before sampling. Cap the bottle tightly.

2. Total Coliform (120mL bottle marked "sterile")
From the kitchen cold water tap, remove anti-splash screen from the faucet and let the cold water run for 4-5 minutes. Fill sterile bottle to the top and be sure not to touch the inside of the bottle or lid. Do not rinse the bottle.
DO NOT TAKE SAMPLE FROM AN OUTSIDE TAP!

3. pH, Hardness, Turbidity, Nitrate & Nitrite (1 liter bottle)
After filling the sterile bottle, fill this bottle to the top (from the same tap).

4. Alkalinity (250mL plastic)

Fill out sample "chain of custody" form completely. Be sure to sign where marked "relinquished by."
Fill out labels with appropriate information.
Note property location and mailing address if different.
Please include a check for $149.00. Samples received without payment will not be tested.
Return samples (within 24 hours - within 12 preferred) to CNA Environmental, Inc. (27 Kent St. Ballston Spa, NY 12020: M-F 8:00 am - 4:30 pm & Sat. 10 am - 12 pm). Refrigerate samples to be held longer than one hour before delivery.